A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

利用地月间空间站的载人登月飞行模式分析

为提高空间站利用率，降低载人登月任务成本，有效开发地月空间，研究了基于地月空间不同轨道空间站的载人登月飞行模式。首先对比直接往返登月飞行模式，对基于空间站的载人登月飞行模式进行任务分析，通过空间站将载人登月任务解耦为载人天地往返任务和登月任务两部分；其次通过轨道设计和稳定性分析提出考虑登月任务需求的地月间空间站可运行轨道和停泊点；最后建立一套飞行模式评价模型，从速度增量需求、飞行时间、空间环境、登月任务窗口、测控条件、交会对接技术难度、后续任务支持性和任务可靠性方面对6种不同位置空间站的登月飞行模式进行分析和定量评价。评价结果表明基于L2点Halo轨道空间站的载人登月飞行模式为更优飞行模式。     

Review and propositions for the sliding/impact wear behavior in a contact interface

A thermal-solid-liquid complex operational environment induces structural interface developing a typical coupling sliding/impact wear behavior. It results in contact damage until systems fail, which may cause significant economic losses and catastrophic consequences. The key point of solving this problem is to reveal the coupling damage mechanism of the sliding/impact behavior in typical systems and life characterization under a complicate evolving environment. This has been a hot topic in the area of mechanical reliability. The main work in this paper can be concluded as follows. Firstly, the main industries in which the “sliding/impact behavior” takes place have been introduced. Then, existing studies on the wear mechanism and degree analysis are presented, which includes surface morphology analysis, wear debris analysis, and wear degree measurement. Meanwhile, existing problems in theoretical modeling and experiments in current research are summarized, so as to point out a bright direction for future research on wear prediction. They include interface contact modeling, mathematic coupling mechanism modeling, wear equation establishment, and wear life characterization, which can provide some new ideas for improving the existing studies on the sliding/impact wear behavior.     

舰载机着舰时航迹稳定性研究

本文讨论了舰载飞机以小于有利速度着舰时的航迹稳定性问题。在分析飞机航迹稳定性的同时,还对油门杆控制、机动襟翼控制对改善航迹稳定性的作用进行了初步探讨;在此基础上还讨论了舰载飞机加装波束导引系统对着舰过程的影响原理。结果表明:采用油门杆控制、机动襟翼控制来改善着舰阶段的航迹稳定性是可行的:而且用以上两控制系统作为内环的自动驾驶仪在波束导引系统自动导引飞机着舰过程中,能控制飞机的飞行速度、高度,帮助驾驶员操纵。     

基于DRFM的引信干扰技术研究

根据脉冲测距引信的工作原理和DRFM的基本功能,设计了DRFM结构,DRFM通过对脉冲延时,达到对脉冲测距引信进行干扰使其早炸的目的,并提出了延时参数的确定原则。     

卫星VLBI观测时延和相位条纹旋转模型研究

空间卫星在绕地球或月球等星体运行时，为了跟踪和控制卫星就要时刻掌握其在空间的位置和运动状态．但由于地球的自转和公转使得卫星和地球之间的相对运动描述关系变得复杂，目标卫星相对地球任意两个观测站的时间差(时延)和多普勒频移(相关条纹旋转)时刻都在改变．VLBI相关处理机是卫星观测和空间探测极为重要的技术手段，其原理以FX和XF两种相关模型处理观测数据．以FX相关模型为基础修正VLBI观测数据的时延补偿和相关条纹旋转的模型，提出对称“1／n Multiplier”时延补偿模型和条纹旋转模型，并且对实际观测数据进行操作和详细分析，对相关相位谱的剩余时延变化趋势和方差分布进行分析，从中找出优选时延补偿和条纹旋转模型．对于精确描述卫星轨道运动状态提供更准确的方法．     

复杂系统的可靠性分析方法研究

本文对未来的运载器的复杂控制系统的可靠性建模、分配和预计的一般方法和程序及综合分析方法进行了讨论和研究。并简述了复杂系统的计算机辅助可靠性分析。     

纵向短周期模态试飞方法和选择

对几种纵向短周期模态试飞方法及其适用性进行了初步分析。结合实际飞行经验,提出了初步判断飞机短周期特性及选择试飞方法。     

Tunnel/predictor display with two-axis control coordination and simplification

A longitudinal-lateral control coordination and simplification concept is considered for a tunnel/predictor display, which presents the command flight path and a specified future aircraft position in a 3-dimensional format to the pilot, for improving flight path control. A basic element of the proposed concept is the generation of common longitudinal-lateral transfer characteristics of the predictor-aircraft system for the crossover frequency region. Control coordination is supported by a dynamics similarity between the longitudinal and the lateral response characteristics of the predictor position in closed-loop pilot control actions. The control coordination and simplification concept is considered to support the pilot in manual flight path control, directed at an enhancement of his control performance and at a reduction of his workload. Results from pilot-in-the-loop simulation experiments support the theoretical findings and show the effectiveness of the proposed predictor concept with control coordination.     

门限自回归模型参数的局部正交设计寻优法

在采用点值图确定门限区间个数的基础上，对门自回归模型中门限值、滞后步长、各门限区间模型阶数，利用正交设计方法寻优，计算工作量锐减，却可得到精度较高的预报模型。